Multifunctional Graphene Heated Down Wrap

The graphene heated down wrap combines flexible graphene heating with lightweight down insulation in a portable wearable design. It can be wrapped around different areas of the body, including the shoulders, back, neck and legs, providing a flexible personal heating solution for home, office, travel and other daily-use environments.

The integrated graphene heating element provides three adjustable temperature levels. According to the product instructions, the low setting is approximately 42–50°C, the medium setting is approximately 47–55°C, and the high setting is approximately 52–60°C. The displayed temperature represents the temperature of the graphene heating element, while the perceived surface temperature may vary depending on use conditions.

The product is equipped with an integrated temperature display controller. Press and hold the power button for approximately two seconds to turn the heating system on or off, and use a short press to switch between the three temperature settings.

In addition to manual control, the heated down wrap supports HUAWEI HiLink compatible smart control. After connection, users can adjust heating settings through the compatible smart control system and set a timer from 30 to 120 minutes in 10-minute increments.

A 5000mAh rechargeable battery supports portable operation, while the product uses a 5V output voltage. The integrated battery pocket, power connection and portable construction allow the wrap to be used without remaining connected to a fixed power source during normal operation.

The down-filled textile structure combines active electric heating with thermal insulation. The product information specifies a down filling weight of 59g and a Business Grey color. Its flexible construction allows it to be worn or positioned in different configurations depending on the required heating area.

For cleaning, hand washing is recommended. After washing, the product should be removed from water promptly and allowed to air dry naturally. Extended soaking should be avoided. For long-term use, the wrap should be stored flat or loosely rolled after use.

For OEM and project requirements, product configuration, color, branding and packaging options can be discussed according to the specific application and order requirements.